Multiple Battery Charger with 4 Units Performing an Automatic 6-Cycles Charge

Multiple Battery Charger with 4 Units Performing an Automatic 6-Cycles Charge
FEATURES
    * Multiple Battery Charger with 4 Units performing an automatic 6-Cycles Charge.
    * Tester of the Battery on board.
    * Printed report of the tests executed (optional).
    * The Standard Kit includes 4 Battery Connectors with clamps.
Battery Charger:
    * New Charging Algorithm performing 6 Cycles: Initialization, SoftCharge, Bulk Charge, Absorption/Desulfation (Recovery of the Lead-Acidcells), Maintenance, Battery Self-Discharge Check.
    * The new Algorithm makes the device ideal to initialize newBatteries as well as to recover/recharge used/exausted Batteries.
    * 4 indipendent and automatic Units with Microprocessor, to manage up to 4 Batteries at the same time.
    * 3 Units with LED Bar + 1 Unit with LCD Display (digital Voltmeter).
    * Diagnostics: real-time detection and communication of occurring anomalies.
Tester:
    * The operator, in about 1 minute, can execute a complete Test ofthe Battery and the engine Alternator, guided step-by-step by theinstructions in scrolling on the Display (user-tutoring device).
    * Tests performed: Battery voltage in Null-load condition,behaviour of the Battery during the engine Start-Up (Cranking Volts& Duration), Test of the engine Alternator.
FUNCTIONING
Battery Charger:
Functioning of the Units with LED Bar
    * Couple of LED Green/Red to indicate the Cycle executed or occurring anomalies.
    * LED Bar indicating the Charge level in real-time (50, 65, 80, 100%).
Functioning of the Unit with LCD Display
    * In case of regular functioning, the LCD Display shows the following messages:
“BATTERY IN ... CHARGE / ... ABSORP. / ... MAINTEN.” according to the Cycle executed.
    * In case of irregular functioning, the LCD display shows diagnostics messages.
Tester:
1. Testing the Battery voltage in Null-load condition: it measures andcomputes the average Battery voltage at rest; the outputs of this Testare the following:
    * average Battery voltage at rest (range 5.0V .. 19.9V);
    * estimate of the Battery State-of-Charge Parameter (range 0 .. 100%).
2. Testing the behaviour of the Battery during the engine Start-Up(Cranking Volts): it measures the minimum Battery voltage during theengine Start-Up and the duration (in milliseconds) of the Start-Upitself. The result of the Test will be one of the followingevaluations: “Excellent”, “Good”, “Fair”, “Poor”.
3. Testing the engine Alternator: it verifies the correct functioningof the engine Alternator. The Test measures the average Battery voltageas the engine is running (range 5.0V .. 19.9V). The result of the Testwill be an evaluation of the vehicle’s Recharging System.
PRINT OF THE TEST RESULT
BC Pro 4 is provided with a serial port for the connection of aprofessional Thermal Printer (optional): as the testing procedure iscompleted, the Printer issues a receipt reporting the Test results andthe date and the time of the Test